Cantilever Mounting Option
If you don't have a sturdy rod holder installed on a T-top, no worries. This is another option for mounting the cantilever. This kit includes parts to install mounts in 2 locations, bow and stern, port and starboard, dock or pool or RV. Any solid flat surface where you need shade can be used to bring your shade comfort with you.
In this package you will receive parts (and/or optional parts) related to the solid flat surface mounting system that firmly holds the Rocket Shādē into position. These parts are designed and tested for required strength and marine durability. Parts included are:
- A 1.5 inch diameter (OD) x 42 inch aluminum mounting tube
- Tube clamp V-lock ASA inserts (2 each)
- T-10 pan head stainless bolts and locking nuts (tube clamp)
- T-10 torx head driver tool
- Flat surface V-lock ASA base mount (4 each) -- for 2 mounting locations
- Spring loaded stay pin, stainless steel (1 each)
Not included in this package are 3/16 diameter fasteners used to anchor the V-lock base mount at the desired location. Because there are so many ways to properly fasten this feature, the installer should determine the proper fastening system to use and follow all instructions.
Plan your installation:
These parts are designed to be solidly attached to almost any flat surface; vertically, horizontally, or in between. The best results will come from good positioning and following instructions. Locating the Rocket Shādē anchor off-center is not an issue – the cantilever adjustability puts the shade where you want it.
For optimal strength, there should be good separation between the integrated pair of tube clamp V-lock mounts. The two V-lock mounts should be 18 to 24 inches apart, to better distribute the cantilever pressure. Generally, farther apart is better than closer. Make sure you have suitable access to the back side of the panel to install a backer plate, or SS fender washers and SS locking nuts.
Use 316 grade marine stainless steel (SS) for best results. Apply marine-grade sealant (like 3M 4200 or 5200) to prevent water intrusion. Use sufficiently long SS bolts with broad head mating surface (or add SS washer) to best securely fasten to flat surface.
Complete instructions are included in the package with the parts.
Key ASA Properties:
- UV Resistance: ASA’s formulation allows it to withstand prolonged exposure to sunlight without significant degradation.
- Weatherability: It performs well under various weather conditions, resisting color fading and brittleness.
- Mechanical Strength: ASA offers good impact resistance and durability.
- Chemical Resistance: It is resistant to many chemicals, making it useful in harsh environments.
Limited warranty.
Made in America.
